Home > News > Content
The Temperature Range Of PTFE Rods Is Very Wide
- Oct 12, 2017 -

PTFE rods are molded from 100% pure PTFE, turning, cutting and other processes refined, in the known plastic it has the best chemical corrosion resistance, not aging, electrical insulation, PTFE Rod and has very low friction coefficient, in the case of no load, can be used at -180~+260 temperature. Uses: Flat cushion, V-shaped pad, lining materials such as sealing material: piston ring, guide and other Lubricating materials: Electrical insulating materials: anti-sticky materials.

PTFE Bar has three kinds of specifications: push-pressure PTFE rod. Extruded PTFE Rods, 4mm~9mm rods, with a diameter of four fluorine rods. Selection of dispersed polymerization polytetrafluoroethylene resin diameter paste paste push-press processing made of diameter 10mm~50mm rod selection of suspended PTFE resin by plunger extrusion process made of diameter 55mm~300mm of the rod molded.

Application of PTFE Rod

There are two kinds of PTFE rods, push rods and molded rods, in the known plastic PTFE has the best chemical resistance and dielectric properties, can be used at -180℃-+260℃ temperature, PTFE Rod as well as a minimum friction coefficient, mainly for some long products and non-standard specifications of mechanical parts: sealing/washer, ring material, wear-resistant board /seat electric, insulating parts, anti-corrosion industry, mechanical parts and components, lining, oil and gas, petrochemical industry, chemical industries, equipment manufacturers.

Chemical industry: Can be used as anti-corrosion materials, can produce a variety of anti-corrosion components, such as pipes, valves, pumps and fittings joints. For chemical equipment, PTFE Rod the lining and coating of reactors, distillation towers and anti-corrosion equipment can be made.

Mechanical aspects: can be used as self-lubricating bearings, piston rings, oil seals and sealing rings. Self-lubricating can reduce mechanical wear and heat, reduce power consumption.

Electronic appliances: Mainly used in the manufacture of various wire and cable, battery electrodes, battery separators, printed circuit boards.

Medical materials: The use of its heat, water, non-toxic characteristics, can be used as a variety of medical devices and artificial organs materials. The former such as disinfection filter, beaker, PTFE Rod artificial heart and lung device, the latter such as artificial blood vessels, heart and esophagus and so on. has been widely used as a sealing material and filler material.

Characteristics of Teflon Rods

The temperature range is wide (from 200 to +260 degrees Celsius).

Basically, all chemicals have corrosion resistance except some fluoride and alkaline metal liquid.

Excellent mechanical properties including anti-aging properties especially for bending and swinging applications.

Excellent flame retardancy (in accordance with astm-d635 and D470 test steps, PTFE Rod which are regulated as flame retardant materials in the air.

Excellent insulating properties (regardless of frequency and temperature)

The water absorption rate is very low, PTFE Rod and has a series of unique properties, such as self-lubricating and not sticky.

Specification for Teflon Rods

Plank: Thick * wide $number. 3~1.5mmx300mm;

Thick * wide =2~60mmx600mmx600mm;

Bar: Diameter: 6~200mm. x 200mm/1000mm

Special size can be customized

Color: White