PTFE tape with high strength characteristics, can be used in sizing machine rollers, thermoplastic demoulding and other industries, can be reused, easy to replace. Can be directly affixed to a variety of large plane and regular surface (such as the roller), simple operation. Dispense with the spraying of PTFE materials need professional equipment, PTFE Tape special technology and must be transported to professional spraying plant processing and other restrictions. Product long-term use of temperature up to 260 ℃.
PTFE tape smooth surface, has a good resistance to viscous, chemical corrosion and high temperature resistance and excellent insulation performance, widely used in packaging, thermoplastic, composite, sealing heat, electronic and electrical industries, where the need for anti-corrosion and corrosion-resistant insulation and other parts of paste, and has repeatedly paste function. After fabric reinforced PTFE adhesive tape with high strength characteristics, can be used in sizing machine rollers, hot plastic demoulding and other industries, can be reused, easy to replace. PTFE Tape Can be directly affixed to a variety of large plane and regular surface (such as the roller), simple operation. Dispense with the spraying of PTFE materials need professional equipment, special technology and must be transported to professional spraying plant processing and other restrictions.
PTFE Tape General coil 1 meters wide, 50 meters per roll. Color is brown and black and white three kinds, at the same time can be divided into various widths, and according to customer requirements to produce a variety of adhesive tape thickness. Choose the PTFE film into the product, PTFE Tape after special treatment high temperature resistant silicone, production of PTFE membrane tape. The maximum width can do 1000MM, the color is white gray two kinds.
The specialty of PTFE tape
1, for Low-temperature-196 ℃, High-temperature 300 ℃, with weather resistance, anti-aging. www. jstefulong. com by practical application, such as in the 250 ℃ high temperature conditions, the continuous placement of 200 days, not only the strength will not be low, but also the weight is not reduced; At 350 ℃ high temperatures for 120 hours, the weight is reduced by only about 0.6% In the case of -180℃ ultra-low temperature and can maintain the original softness.
2. Non-adhesion: smooth surface, PTFE Tape not easy adhesion of any substance. Easy to clean all kinds of grease stains, stains or other attachments on its surface; almost all sticky substances, such as pastes, resins and paints, can be easily removed;
3, resistant to chemical corrosion, strong acid, strong alkali, PTFE Tape aqua regia and various organic solvents corrosion.
4, resistant to pharmacy, non-toxic. Almost all pharmaceutical items can be resistant.
5, with high insulation performance (dielectric constant small: 2.6, tangent below 0.0025), Anti-ultraviolet, anti-static.
PTFE Tape's main specialty is: 1. Good heat resistance (continuous use of temperature 260°c above), even in the overheated heater can be safely used. 2. PTFE Tape Good resistance to viscous, molten packaging film "slag" will not stick to the heater. 3. Electrical insulation is excellent. 4. Good stability, good durability and easy maintenance.
- Common Misunderstanding Of Polytetrafluoroethyl...
- Teflon Engineering Plastics And General Plastic...
- Small Teflon Seal Behind The Story
- Application Of Polytetrafluoroethylene Engineer...
- Points For Attention In CNC Machining Of Polyte...
- PTFE Gasket Why The Use Of Failure
- Summary Of Leakage Mode Of PTFE Sealing Gasket
- A Brief Introduction To PTFE Packing
- Expanded PTFE Elastic Band Is Easy To Use And D...
- Aramid Graphite Packing And High Water - Based ...
- PTFE Plate With Acid And Alkaline
- The Temperature Range Of PTFE Rods Is Very Wide
- PTFE Tape Has High Insulation Performance
- Teflon Rods Have A Push Rod And Molded Rod Two
- Teflon Tube Has Excellent Thermal Stability
- PTFE Gasket Has Good Mechanical Toughness